Project Specification:

  1. Structure build in Bosch Rexroth Aluminum Strut Profile 40x40L.
  2. Core screw considered as a joint and Quick Connector considered as movable joint.
  3. For Track Supporting Profile, 5mm THK Acrylic Sheet Considered.
  4. Flange nut, T-Head Bolt & T-NUT considered.
  5. MS Bracket & Hinges Considered for Door, black Cover Cap considered for Open End & open Two Slot closed by Cover Profile Black N10.
  6. Roller with Roller Carrier considered with their Two Bracket for each Carrier i.e. feeding and stopper bracket with accessories for Fixing.

Delivery Time:-2-3 Weeks After PO

pick-to-light

Project Specification:

  1. Material Handling Trolley make Bosch Rexroth profile 40x40L.
  2. Using Rexroth Accessories like Core Screw T40 consider as fixed joint Quick connector used as movable joint.
  3. SS Plates considering for small hardware carrying material. Fixed 6mm laminate considered.
  4. Also supo wheel considering for movement of Trolley.

Delivery Time-1-2 Weeks After PO

material-handling-trolley

Project Specification:

  1. Inspection Table make Bosch Rexroth profile 40x40 L & using Rexroth Accessories.
  2. Fixed 6mm laminate considered & finishing surface use ESD Blue matt sheet.
  3. Back side closed by ACP sheet.
  4. Leveling foot considered.
  5. Also used tube lights that the visual inspection part should be easily visible.

Delivery Time-2-3 Weeks

Inspection-table

Project Specification:

  1. Machine structure configured with bosch rexroth aluminium profile & accessories.
  2. Equator enclosure consist top and bottom unit.assembled without middle shelf.
  3. Assembled unit as per metrology standards for metrology machine.

Delivery Time-2-3 Weeks

EQUATOR-structure

Project Specification:

  1. Machine structure configured with bosch rexroth aluminium profile & accessories.
  2. Core screw considered as a joint and Quick Connector considered as movable joint for Track Supporting Profile
  3. 5mm THK Acrylic Sheet Considered. also consider flange nut, T-Head Bolt & T-NUT.
  4. MS Bracket & Hinges Considered for Door, black Cover Cap considered for Open End & open Two Slot closed by Cover Profile Black N10.
  5. Roller with Roller Carrier considered with their Two Bracket for each Carrier i.e feeding and stopper bracket with accessories for Fixing.3MM PC Sheet Considered for Doors with Gasket.
  6. Ball Catches Considered for door holding.

Delivery Time-3-4 Weeks

machine-structure
machine-structure-2
machine-structure-3
machine-structure-4

door-assembly

main-structure-and-substations-6

Project Specification:

  1. The primary element of any ESD work bench is the static dissipative work surface make Aluminum Profile
  2. It is necessary to ensure that all static dissipative surfaces, wrist straps, etc are all connected to a common grounding point, and wired in a suitable manner. It is essential that this is achieved effectively and in the correct manner from the viewpoint of electrical safety.
  3. We also supply ESD Bins, ESD chairs, ESD shoes, Heel strips, gloves, wrist straps and also ESD safe soldering fume extractor along with our ESD workstation on request.

Delivery Time-3-4 Weeks

esd-workstation